How To Hang A Cowhide Rug On The Wall – 5 Unique Ways to Put Up That Statement Piece

Prints and patterns can be seen everywhere, especially in the environment, and it is an artwork that comes naturally in random places. From patterns of flowers to skin textures of snakes, the presence of these one-of-a-kind designs is genuinely fascinating. Without a doubt, more people replicate these patterns on things such as bags and decorations.

Through the fields of design – may it be fashion or interior – these prints are showcased for people to have a little piece of nature everywhere they go. Anyhow, some people don’t know how to hang a cowhide rug on the wall. But it isn’t that hard, to be honest. All you need is to follow these simple ways how to hang a cowhide rug on the wall.

How to Hang A Cowhide Rug On The Wall: Using 5 different methods

Method #1: Nailing

There is nothing an old-fashioned nail and hammer cannot do! People often put up cowhide rugs by nailing them on a wall, but their weight can be challenging to manage. But before anything else, you have to figure out the perfect angle to put up that rug before putting any permanent actions on it.

While thinner nails are preferred to lessen the obviousness, heavier rugs may require thicker ones. You also may need a helping hand positioning the rug in its place. Nail the top center and top corners first to secure, and let gravity place the rug in its position. After nailing the upper portions, nail the outermost edges of the rug to affix their place on the wall.

An important tip is to ensure that the edges are flattened and not curled to gain additional stability and not let the nails pop out. Stretch out the rug before nailing to avoid creasing and sagging.

Method #2: Stapling 

Stapler guns are essential in making home decorations and furniture, and it gives extra security to pieces in just one click! For example, you might be wondering if staples can hang an approximately 16-pound rug on the wall. Well, the answer is yes! This equipment is commonly used on woodwork and pieces of furniture; you just have to find the correct staple gauge.

To staple a cowhide rug on the wall, you must first make sure that you have a thin wall that a staple gun can work on. It is also recommended to position the rug and staple it on the top center and corners first, then work your way on the outer parts. Always stretch to keep the rug flattened while attaching it to the wall.

Method #3: Using a wooden floating frame

A small cowhide rug can fit in a large wooden frame depending on the size. Frames are helpful if you wish to preserve the cleanliness and texture of the rug. In addition, it prevents dust particles and accidental mistakes from ruining the cowhide rug’s beauty.

Framing a cowhide rug requires a glassed wooden frame. First, take the back out, but make sure to take out the staples carefully and not ruin the backing. Then, lay your rug flatly facing the glass part of your frame. To secure the rug, you can use double-sided tape to attach it to the backing when you close the frame. Next, staple it back together, and ta-da!

Method #4: Using a rug hanger

Rug hangers are specific and certified ways to hang up your rug. These are long rods that have clips or clamps hanging from them to secure the placement of your cowhide rug. But do not worry; these clamps are perfectly safe for your rug and will not cause damage. Using rug hangers may not be as discreet as the other options, but many available designs make the hanger a part of the decoration.

It takes extra procedures to mount a rug hanger on the wall’s surface. First, you have to secure the hooks that carry the rod. Next, measure the rod, place the two hooks on both sides, and then mark where you should screw. Remember to level the hooks equally for the rod to appear straight. After screwing the hooks and positioning the rod, you can clamp the cowhide rug’s upper portion.

Using this method requires rugs with a straight to a nearly straight edge. If you have the typically shaped cowhide, you can use this method by clamping the lower portion rather than the upper, where the two corners are stretched out. By this, you can just attach the two edges and remove the remaining clamps in the middle.

Method #5: Using a Velcro or a double-sided tape

Using Velcro or a double-sided tape may be the easiest way to put up a rug on a wall. Nevertheless, they still manage to provide stability and secure that the rug will not fall after a couple of days. If you need an option that will not create a permanent change on your wall, this may be a perfect way!

Attaching a Velcro on the wall includes a couple of easy steps. First, stick or sew the Velcro on the back of the rug. Make sure to place them on the outer edges to distribute the weight evenly. Next, position the rug on the wall at an angle you envision, then trace the Velcro pads using a pencil. Finally, stick the other half of the Velcro onto the wall, then attach the rug to its proper placement.

If you think the previous steps are easy, the double-sided tape may be the easiest option to hang a cowhide rug on the wall. But first, make sure that you are utilizing heavy-duty wall double-sided tape or carpet tape to support the weight of the rug. Then, Place the double-sided tape on the outer edges of the rug, peel off the backing, and place it in a position you like!


A cowhide rug can indeed be a piece that can be an emphasis in your area, but hanging it should not be a pain. Use a method that correlates to your skill and available resources – just make sure to follow the steps carefully and be sure that you know what you are doing. Nevertheless, cowhide rugs are durable and can last for many years, so it is worth the challenge.

From nailing to taping, these tips will ensure the placement of your rug and keep it in place no matter what extreme movement it encounters. With the rug’s strength and the methods’ stability, you will indeed have a timeless piece on your wall that could fit any aesthetic you aim to do. But do remember that your rug is not spill-proof, so do your best to maintain it!


1. What type of wall is ideal for hanging up a cowhide?

If you are using methods such as nailing and stapling, it is essential to guarantee that your wall is thin and can handle these materials. Walls such as plasterboard and fiberboard are easy to work on. In addition, thin plywood can handle staples, while thick ones can handle nails.

2. How big and heavy are cowhides?

Common cowhides weigh more or less 16 pounds or 7 kilograms. Their size depends on your preference, varying from 6 feet to 8 feet in length.

3. What does leaving the bottom hanging to do?

Some people recommend attaching the top portion of the rug first and leaving the bottom unattached for a couple of days. This additional tip helps to avoid the appearance of sags on the rug’s surface.

Leave a Comment